Aventos Changes to Centre hinge pack.jpg

Blum will shortly be updating the AVENTOS HF hinge & plate pack to bring it in line with their current mounting plate range.

Replacing the zinc diecast mounting plate with the newer pressed steel plate. This change will also provide the option of a 3rd fixing point.

This update will necessitate a change in the required drilling pattern for the cabinet & doors as the set back on the newer plates is 20mm as opposed to 22mm.

This means the drilling for the plate on the lower front will be 2mm lower & on the upper door & cabinet are 2mm closer to the edge.

The cruciform plates will be removed from the pack as they were for framed doors & rarely used.

The new packs will be phased in over the next 3 months.

Current:                                                                 

Current.png

New:

New.jpg

If you have any queries, please do not hesitate to contact a member of our Technical Department.  Or contact Blum directly freephone number 0800 2300898 or email technical.uk@blum.com 

Download our Assembly Instructions For Fully Concealed Door Straighteners

More Posts

Subscribe Here!