Flush Doors.jpg

“Discrete interior doors” – the trend for a timeless interior style with a sleek and minimalist design. 

With its invisible door systems SWS responds perfectly to this trend.  Thanks to these systems, closed doors and walls constitute one whole:  the disturbing frames disappear, while the hinges are mounted in such a way that from the outside they are no longer visible.  SWS offers an ‘invisible’ solution for hinged, pivoting and slide-in the-wall pocket doors.

Hinged doors

Thanks to an ingenious aluminium interior door frame, it is possible to achieve integrated doors in walls with a frameless appearance.  With the Invisidoor the door is lined up perfectly with the wall allowing architect to crate clean lines.

What are the benefits?

  • AESTHETICS

- no visible frame around the door

- standard equipped with a primer coating

  • EFFICIENT INSTALLATION

- option of fitting before or after plastering

- units are supplied with special hinge caps in the cut-outs for protection during plastering.

  • CAN BE APPLIED UNIVERSALLY

- for all standard and non-standard door openings (new builds and renovation)

- for both brickwork and gymsum board walls (metal stud and CLS frames)

  • PLASTER CRACKING IS PREVENTED THANKS TO THE:

- sturdy frame construction (integrated corner connection)

- stable profile

- direct, sturdy and easy mounting on walls by using screws or stone anchors

- good adhesion on the plaster work against the profile thanks to the special dovetail profiling.

  • DIMENSIONS

- doors at room height

- you can easily adjust the upper profile (width) by sawing/adjusting as needed.

 

Pivoting Doors

Another perfect solution based on the Invisidoor technology.  Never losing the austere design and maintaining that timeless, streamlined look.

Has much the same benefits as above, but as the doors are on pivots there are no hinges to be seen when then door is open.

 

Pocket Doors

Sliding door systems are being applied to utilize the available space at its finest.   Thanks to out sliding door systems, based on the Invisdoor concept, maintaining that timeless and streamlined look.

What are the benefits?

  • AESTHETICS

- 100% free passage because the door completely slides into the wall.

- no visible frame around the door

- standard equipped with a primer coating

- minimum spacing of 5mm between the top of the door panel and the frame.

  • EFFICIENT INSTALLATION

- installation of frame and door at the same time.

- can be finished with double plasterboard (only for a wall thickness of 125mm).

  • CAN BE APPLIED UNIVERSALLY

- can be used for all standard and non-standard door openings (new builds and renovation)

- can be used for door thicknesses of 38-45mm

- can be used with any type of hook lock

  • PLASTER CRACKING IS PREVENTED THANKS TO THE:

- sturdy frame construction (integrated corner connection)

- stable profile

- direct, sturdy and easy mounting on walls by using screws or stone anchors

- good adhesion on the plaster work against the profile thanks to the special dovetail profiling.

  • DIMENSIONS

- wide range of dimensions

- made-to-measure

 

Download brochure>>

More Posts

Subscribe Here!